Dimension Technician

Position Details:
 Department:Quality
 Location:Litchfield
 Apply Until:07/02/2010
 Office Hours:Modified: M, T, W, Sa, Su - 2:45 PM - 11:15 PM
 Division:Minnesota Rubber and Plastics - Litchfield


Description/Duties:
ACCOUNTABILITIES:

%Time

#

Accountability

10
1.

Material Testing:
  • Tensiometer (Tensile & Elongation)
  • Hardness (IRHD, A Scale, M Scale)
  • Compression Set
  • Volume Swell & Specific Gravity
  • Flow Test
  • Wick Rate & Titration Testing
  • Specialty

20
2.

Dimension:
  • OGP
  • Tool Scope
  • MicroVu
  • ST Comparator
  • Deltronic Comparator
  • Drop Gages, Micrometers, Height Gages, Bore Gages, Depth Gages

20
3.

Data Analysis:
  • SPC - Statistical Process Control
  • SPC Charting
  • COA - Certificates of Analysis
  • Minitab
  • PpK / CpK / Histograms
  • Gage R&R
  • Data Analysis

15
4.

PC Software and Lab Systems:
  • Microsoft Office
  • Work Instructions
  • BPCS
  • Lab Systems
  • Database Entry (Lotus)

15
5.

Quality Systems:
  • Specifications
  • Work Instructions / ECR / DCR
  • NCMR
  • APQP / DPSS
  • Redline Procedure
  • Dimensional Reports
  • PPAP / CPAP / FAIR
  • Blue Print Reading & RMA Specs
  • Annual Layout
  • Workmanship Standards
  • CAR / PAR
  • Control System
  • Calibration System (designated Dim Tech)
      • Pyrometers
      • Outside Vendors
      • Small Equipment
      • Large Equipment
      • Fixtures and Customer Supplied Gages

10
6.

Automated Vision Inspection (designated Dim Tech):
  • Support Part Number Changeovers on Vision Sorting Equipment

5
7.

Support ISO/TS-16949, ISO-13485, and ISO 14001 initiatives.




5
8.

Performs other duties and assumes accountabilities as apparent or as delegated, including mutually agreed upon objectives.

RELATIONSHIP TO OTHERS:
Must work with Litchfield Operation Team, Litchfield Engineering Team, Litchfield Staff, Litchfield Supervisors, Dimension Technician Lead, Production Employees, Corporate Staff, Dimension Technicians, and Manufacturing personnel.
DIMENSIONS OF POSITION:
Directly works with managers, engineers, supervisors and Dimension Technicians to maintain capable processes. Participates with all employees on problem solving and process improvement. Provides accurate and timely feedback to all areas. This position does have the authority to shut down production due to quality related issues.
Designated Dimension Techicians: Support Calibration systems, Support Automated Vision System Changeovers.

Background/Experience Preferred:
EDUCATION AND EXPERIENCE:

*Education:+ High School diploma or equivalent required
+ Basic computer skills required
+ College or Technical degree experience desired
+ Knowledge of statistical analysis and techniques
+ Knowledge of metrology techniques such as: MSA, Gage R&R, Bias, Linearity, Stability, etc.
+ Knowledge of Kaizen and other Continuous Improvement techniques desired
*Experience:+ DOE experience desired
+ ASQ certification desired

Tech I = 0-3 yrs experience in manufacturing & measurement environment.
Tech II = 3-5 yrs experience in manufacturing & measurement environment & demonstrated proficiency in equipment use/methods.
Tech III = 5 + yrs experience in manufacturing & measurement environment & demonstrated high proficiency in equipment use/methods.
Tech Lead = 5 + experience in manufacturing & measurement environment & demonstrated proficiency in equipment use, measurement methods, troubleshooting, & problem solving.


For Further Information Contact:
Marla Wendlandt
Human Resource Manager
45 Precision Dr
Litchfield, MN 55355
mwendlandt@mnrubber.com




___________________________________________________________
Equal Opportunity Employer